Become a reseller
EnGenius ENS202 outdoor wireless bridge / CPE – product photo
EnGenius logoENS202End of life

EnGenius ENS202 Outdoor wireless bridge / CPE

N300 2.4 GHz Wireless Outdoor Access Point/Ethernet Bridge

The EnGenius ENS202 is a outdoor wireless bridge / CPE: N300 2.4 GHz Wireless Outdoor Access Point/Ethernet Bridge. It suits linking buildings without cabling and wireless links for cctv cameras. Vemax Distribution Sdn Bhd supplies the ENS202 in Malaysia through resellers and system integrators, with local warranty and pre-sales support from offices in Kuala Lumpur, Kuching, Penang and Kota Kinabalu.

The ENS202 has been discontinued by EnGenius. This page keeps its specifications and datasheet for existing users. Contact Vemax for the recommended replacement.

  • Outdoor wireless bridge / CPE
  • Wi-Fi 4

Supplied by Vemax Distribution Sdn Bhd, EnGenius distributor in Malaysia, with local stock, warranty and RMA support.

Key features of the ENS202

  • N300 2.4 GHz Wireless Outdoor Access Point/Ethernet Bridge

Best for

  • Linking buildings without cabling
  • Wireless links for CCTV cameras
  • Factories, plantations and estates
  • Wireless ISP and last-mile links

ENS202 overview

The ENS202 provides 11n speeds outdoors to 300 Mbps on the 2.4 GHz band. Extend the network over short or long distances, building-to-building, to a guest bungalow or work shed and eliminate cable runs when extending the network between buildings up to 1,300 feet from the main house. Strong 26 dBm Transmit Power Extends Wi-Fi Long-Range to an Outbuilding or Yard Internal Dual-Polarity 8 dBi MIMO Antenna Maximizes Outdoor Wireless Connections Weatherproof IP55-Rated Housing Resists Harsh Climates PoE Extends Power to Unwired Areas; Connect an IP Camera or AP via 2nd Port

Product description from EnGenius.

ENS202 key specifications

Wi-Fi standard802.11b/g/n
Radio2.4 GHz
Radio chains (MIMO)2 x 2:2
Max rate 2.4 GHz300 Mbps
Ethernet ports2 x 10/100 Ethernet Ports
Power / PoE24V Proprietary
Antenna8dBi (Port1: 60°x80°;Port 2 80°x60°)
Transmit power 2.4 GHzUp to 26 dBm
MountingPole, Wall
MountingWall/Pole
IP ratingIP55
HousingIP55
Dimensions185 x 100 x 27 mm
EnvironmentOutdoor
Full technical specifications

Technical Specifications Ap

StandardIEEE 802.11b/g/n on 2.4 GHz
Memory CapacityMemory: 64 MB Flash Memory 16 MB
AntennaInternal Directional Antennas 8 dBi on 2.4 GHz
Physical Interface2 x 10/100 Fast Ethernet Ports 1 x Reset Button
LED Indicators1 x Power WLAN (Wireless Connection) 2.4 GHz 2 x LAN
Power SourcePoE injector (EPA2406GP) 100V~240V AC, 50-60Hz 0.4A @ 120V AC Surge Protection: 1KV ESD Protection Contact: 4KV Air: 8 KV
MountingWall Mount Pole Mount
Ingress Protection MarkingIP55-Rated Enclosure

Wireless Radio Specifications Ap

Operating Frequency2.4GHz
Operation ModesAccess Point Repeater Client Bridge Client Router WDS: AP, Bridge
Frequency Radio2.4GHz: 2400MHz ~ 2835MHz
Transmit PowerUp to 15 dBm on 2.4 GHz Max transmit power is limited by regulatory power
Radio Chains/Spatial Streams2 x 2:2
Supported Data Rates (Mbps)2.4 GHz: Max 300 802.11b: 1, 2, 5.5, 11 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15)
Supported Radio Technology802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11n: Orthogonal frequency-division Multiplexing (OFDM)
Channelization802.11n with 20/40 MHz channel width 802.11b/g with 20 MHz channel width
Supported Modulation802.11b: BPSK, QPSK, CCK 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
AP Radio SettingsAP Client Limiting VLANs for AP – Multiple SSIDs Wi-Fi Scheduler Traffic Shaping Client Traffic Status

Management Features Ap

Multiple BSSIDSupports up to 4 SSIDs
VLAN TaggingSupports 802.1q SSID-to-VLAN tagging VLAN Pass through
QoSWMM
SNMPv1, v2c, v3
MIBI/II, Private MIB
Deployment OptionsStandalone (Individually Managed)
ConfigurationWeb Interface (HTTP) CLI (Telnet)
Control FeaturesAuto Reboot Firmware Upgrade
SecurityWPA/WPA2 Enterprise Hide SSID in beacons MAC Address Filtering Https Support

Dimensions Weight Ap

ENS202 DeviceWeight: 0.66 lbs. Width: 3.93″ (100 mm) Length: 7.08″ (186 mm) Height: 1.14″ (29 mm)
Package Contents– ENS202 Outdoor AP – PoE Injector (EPA2406GP) – Pole Mount Ring – Mounting Screw Set – Quick Installation Guide
CertificationsFCC IC

Specifications from EnGenius. Subject to change by the manufacturer; check the official datasheet for the latest details.

Suggested current models

ENS202 questions

Where can I buy the EnGenius ENS202 in Malaysia?

Vemax Distribution Sdn Bhd is the EnGenius distributor in Malaysia. You can buy the ENS202 through our reseller and system integrator network in Kuala Lumpur, Selangor, Penang, Johor, Sabah and Sarawak. Contact Vemax at +60 16-874 7515 or sales@vemax.com.my and we will connect you with a reseller or quote you directly for projects.

What is the price of the EnGenius ENS202 in Malaysia?

Pricing depends on quantity and project size. Request a quote from Vemax for the latest ENS202 price in Malaysia. Registered resellers receive dealer pricing.

Does the ENS202 come with a Malaysian warranty?

Yes. Units supplied by Vemax carry the official EnGenius warranty with local RMA handled in Malaysia, so there is no need to send products overseas.

Where can I download the ENS202 datasheet?

Use the "Download datasheet" button on this page. It downloads the official PDF directly from EnGenius.

What replaces the EnGenius ENS202?

The ENS202 is end of life. Current models to consider include EOC620, EOC610, EOC600. Contact Vemax and our engineers will recommend the right replacement for your site.

Can I become a EnGenius reseller in Malaysia?

Yes. Vemax works with IT resellers, ELV contractors and system integrators across Malaysia. Register through the contact form to get dealer pricing, demo units and technical training.